A measurement is a number with a unit. Learn the customary units (inches, pounds, gallons) and the base-ten metric system (meters, grams, liters), then convert within and between them by multiplying by a unit rate, plus time and the Celsius-Fahrenheit link. Aligned to CCSS 6.RP.A.3 (convert measurement units using ratio reasoning) and 7.RP.A.1.
What you’ll learn
A measurement is a number and a unit; the unit decides what the number means.
Customary units are linked by fixed facts (12 in = 1 ft); metric units scale by powers of 10.
Convert by multiplying by a unit rate arranged so the old unit cancels.
Between systems, use an approximate bridge like 1 mi≈1.61 km.
A research-backed week of short routines that help a student study less and remember more: spacing, self-quizzing, and a calmer week before tests.
Learning acts
Discover
Think about this
Why does converting to a smaller unit make the number larger?
Unit conversion within the metric system | Pre-Algebra | Khan Academy (9:17)
Learn
Read each section like a formula card: why it matters, the steps, one worked example, then the check. Try the steps yourself before moving to Practice.
Customary units: length, weight, capacity
The US customary system uses a different-sized unit for each job, linked by fixed facts you memorize.
How to do it:
1. Decide the measure: length, weight, or capacity.
2. Recall the fact that links the two units.
3. Multiply to go to a smaller unit, divide to go to a larger one.
Worked example: For length, 12 in=1 ft,3 ft=1 yd, and 5280 ft=1 mi. So 2 ft=2×12=24 inches.
Measure
Key facts
Weight
16 oz=1 lb,2000 lb=1 ton
Capacity
8 fl oz=1 cup,2 cups=1 pt,2 pt=1 qt,4 qt=1 gal
Check: going to a smaller unit (feet to inches) makes the number bigger; going to a larger unit makes it smaller.
Metric units and the base-ten ladder
The metric system uses one base unit per measure (meter, gram, liter) and prefixes that scale it by powers of 10. Every step on the ladder is ×10.
How to do it:
1. Line up the prefixes: kilo, hecto, deka, base, deci, centi, milli.
2. Count the steps from the unit you have to the unit you want.
3. Move the decimal that many places (toward the smaller unit means more places to the right).
Worked example:3 km=3000 m, because kilo is 3 steps above the base, so ×1000. And 250 cm=2.5 m, because centi to base is 2 steps up, so ÷100.
Check: metric conversions never need odd facts like 5280; they are all powers of 10. A kilogram is 1000 grams; a milliliter is 10001 liter.
Worked example
Convert 3 km to meters.
1
Count the steps from kilo down to the base unit.
kilo→base=3 steps
2
Three steps is ×10×10×10=×1000.
3×1000=3000
Answer3 km=3000 m
Now you try
Optional practice. This does not change your mastery result.
Convert with a unit rate
A conversion factor is a fraction equal to 1, like 1 ft12 in. Multiply so the unit you do not want cancels.
How to do it:
1. Write the amount as a fraction over 1.
2. Multiply by the conversion factor arranged so the old unit is on the bottom and cancels.
3. Whatever unit is left is your answer's unit.
Worked example: Convert 5 ft to inches: 5 ft×1 ft12 in=60 in. The "ft" cancels, leaving inches.
Check: if the unit you wanted did not survive, you flipped the factor. Put the old unit on the bottom so it cancels.
Worked example
Convert 5 feet to inches using a unit rate.
1
Multiply by the fact 12 in=1 ft, with feet on the bottom.
5 ft×1 ft12 in
2
The "ft" cancels; multiply the numbers.
5×12=60
Answer5 ft=60 in
Now you try
Optional practice. This does not change your mastery result.
Convert between customary and metric
Across systems, use an approximate bridge fact, then convert as usual.
Bridge
Approximate
Length
1 in≈2.54 cm,1 mi≈1.61 km
Weight
1 kg≈2.2 lb
Capacity
1 gal≈3.79 L
How to do it:
1. Find the bridge fact for the measure.
2. Multiply by it as a unit rate so the old unit cancels.
3. Round sensibly; these bridges are approximate.
Worked example: A 5 km race is about 5 km×1.61 km1 mi≈3.1 miles.
Check: a kilometer is shorter than a mile, so a distance in km should give a smaller number of miles.
Time and temperature
Time uses fixed steps; temperature links two scales with a formula.
Time:60 s=1 min,60 min=1 hr,24 hr=1 day.
Temperature: Celsius and Fahrenheit connect through F=59C+32.
Worked example:20°C in Fahrenheit is 59(20)+32=36+32=68°F. Water freezes at 0°C=32°F and boils at 100°C=212°F.
Check: room temperature is about 20°C, or 68°F. If your answer lands near freezing, recheck the formula. Try the unit converter.
Key points to remember
A measurement is a number and a unit; the unit decides what the number means.
Customary units are linked by fixed facts (12 in = 1 ft); metric units scale by powers of 10.
Convert by multiplying by a unit rate arranged so the old unit cancels.
Between systems, use an approximate bridge like 1 mi≈1.61 km.
Fahrenheit and Celsius connect through F=59C+32.
Practice
Practice what you learned
Apply what you read with the activities below. Use calculators and formula sheets as needed; scored quizzes are in Apply.
Your place saves as you go. Use Back to journey when you are ready to continue the path.
Apply
Apply what you learned
The best check is explaining Measurement & Unit Conversion in your own words. The tutor listens like a curious friend and asks clarifying questions. No score, no grade.
Explain it in your own words
Explain Measurement & Unit Conversion as if to someone who has never heard of it. The tutor responds like a curious learner with clarifying questions, not a score.
+Reflection prompts (optional)
Why does converting to a smaller unit make the number larger?
What makes metric conversions easier than customary ones?
Why do we set a conversion factor equal to 1 before multiplying?
+Optional: scored check
Want a scored check? Open it here. The teach-back above does not require finishing it.
The scored check opens up once you have spent a little time in Learn and Practice. Recall sticks best after you have engaged with the material first.